News_Zhongyi Textile Machinery

中文版

English

86-13901468376

NEWS

Company News

Industry News

Announcement

Home page

2024-08-08

Technological innovation of fabric coding machine promotes a new chapter of efficient production in the textile industry

With the rapid development of the global textile industry, technological innovation in the textile machinery industry has increasingly become a key factor in promoting the progress of the industry. Recently, as an important equipment in the textile production line, the fabric coding machine, with its efficient and accurate performance, has been widely used in the textile industry, and led a new trend of efficient production.

Learn more

2024-08-07

How to deal with the use of fabric inspection machine

Regarding the common fault repair, the common fault of the fabric inspection machine is mainly 8 kinds. For the cause of these different problems, we provide the following brief repair methods for the general readers to refer to. The fabric is skewed, in the fabric inspection a few forward when the “bite dead” situation. This is mainly because the fabric inspection machine guide roller is not flat new led to, equipment operators only need to adjust the guide roller parallelism can be dealt with.

Learn more

2024-08-06

Manufacturers teach how to deal with winder failure

A winder for steel strip processing comprises a support base for removably attaching to an attachment through the penetration on both sides thereof, and a rotary shaft is set through a device hole, and in with can be rotated in passing through the device hole, and the beneficial effect of the rotation of the joints of this utility novelty is the power of screwing of steel coils by being driven by the rotary shaft so as to realize the power of screwing of the steel coils.

Learn more

To summarize the range of uses of the yardage machine

The utility model yard cloth machine touches a kind of fabric folded into a horse equipment. At present, large textile enterprises choose plane linkage pulling line cloth machine, in the bed, the bed pivot equipment swing lever, in the swing lever at the top of the guide plate, in the guide plate below the set up of the arc-shaped work table, in the work table on both sides of the set up pressure foot equipment, articulation to make the swing lever reciprocating movement of the drive equipment, the swing lever.

2022/05

Introducing the structure of the winder

Nowadays, winders, including racks, are equipped with winders. The winder consists of clash rollers and air lift shafts arranged in parallel, as well as a pressure tissue for pressure organization. The air lift shafts are located close to or away from the clash rollers. Smaller diameter take-up rollers allow the diameter of existing take-up rollers to be changed, enabling rapid changes of take-up rollers.

2022/05

Talk about the requirements for maintaining a hydraulic baler

The protection and maintenance of the equipment is necessary. Only protection can ensure the normal use of equipment. Hydraulic baler is also the same. In the protection and maintenance of hydraulic balers, there are several aspects to pay attention to. Follow the editor to learn from the hydraulic baler in the protection of the need to meet the requirements of it.

2022/05

Talk specifically about the maintenance of the fabric inspection machine

In the textile industry, fabric inspection machine is a household name for textile machinery, which is essential for the textile and garment industry. Fabric inspection machines are primarily used to detect flaws and different colors in fabrics and fabrics. They actively pack and measure the length of the opposite packages. Equipped with electronic drawback detectors, the results are analyzed and printed uniformly by computer.

2022/05

Compare the performance of fabric testing machines

Traditional manual cloth inspection cloth inspector in 1 hour to find more than 200 defects, manual cloth inspection concentration to maintain more than 20-30 minutes, more than this time cloth inspection will occur fatigue, the speed of cloth inspection is only 5-20 m / min, more than this speed will occur leakage test. Active fabric inspection machine, it can replace the manual.

2022/05

Talk about the working principle of the hydraulic baler

Hydraulic baler is now very widely used in industrial applications, the main purpose of the hydraulic baler is used to exercise the steel in the steel deformation, its ability to deform the steel into a variety of different shapes for use in the delivery process, reducing the burden of transportation, but also reduce the cost of transportation, improve the operational efficiency of the steel mill.

2022/04

What types of fabric rollers are commonly used

This kind of equipment, such as cloth rolling machine, is more common in life and has been widely used in many occupations. For different users, they need to select different types of products, in order to better make their needs satisfied. However, many users are not clear about the specific types of fabric rolling machine, so the selection is relatively confused.

2022/04

There are several types of general winders

Winder can be divided into two categories: touch type winder and center driven type winder. Touch winders, also known as circumferential, drive roller winders, are a common type of winders in blown film production lines. Drive gelatinized or chrome rollers, winding shaft or film rolls are pressurized and rollers are attached together, with mechanical or pneumatic methods will be able to obtain the roll pressure.

2022/04

Mobile:

86-13901468376

Tel:

86-513-82506284

Add: Dongshe Town, Tongzhou District, Nantong City, Jiangsu Province
Contact: 86-13901468376 Mr. Zhu
Tel: 86-513-82506284 / 86-513-82506333
Fax: 86-513-82506666
E-mail: sales@ntzhongyi.com
Website: http://www.ntzhongyi.com

Online Message

Please fill in the form below, our staff will contact you within 24 hours and solve your problem as soon as possible.

Business License

NEWS

HUATAO GROUP