搜索
Search
NEWS
Check category
/
/
What are the common handling faults of the cloth inspection machine

What are the common handling faults of the cloth inspection machine

  • Categories:Trends
  • Author:
  • Origin:
  • Time of issue:2021-05-10
  • Views:0

(Summary description)The fabric inspection machine is a pre-sewing equipment, which is a special machine for the clothing industry to detect fabric defects.

What are the common handling faults of the cloth inspection machine

(Summary description)The fabric inspection machine is a pre-sewing equipment, which is a special machine for the clothing industry to detect fabric defects.

  • Categories:Trends
  • Author:
  • Origin:
  • Time of issue:2021-05-10
  • Views:0

The fabric inspection machine is a pre-sewing equipment, which is a special machine for the clothing industry to detect fabric defects. Fabric manufacturers often use fabric inspection machines to inspect heavy fabrics

The fabric inspection machine will have common failures during the operation. The following is a simple maintenance reference for common failures.

Automatic side-alignment and roll cloth is an important function of the cloth inspection machine, but it will cause the phenomenon of uneven rolls, which is caused by uneven cloth guide wheels and rolls.

Only by adjusting the parallelism of the two can ensure the effect of side-rolling. In addition, long-term failure to clean the dust, stains or wear and tear on the long-counter wheel, and the relative temperature of the cloth is not raised during the transportation process, will cause the problem of inaccurate length-counting of the cloth inspector. The lighting brightness of the glass plate is one of the factors that affect the detection effect. Regular cleaning of debris, cloth lint, and dust on the glass plate of the cloth inspection table and stabilizing the lighting voltage can solve the problem of insufficient lighting brightness. In addition, sometimes it is found that it will become heavy during the cloth guiding or rolling process. This problem occurs because the transmission parts are not installed properly, or the transmission parts have more oil, cloth scraps, dust, etc. Wait, as long as you clean up the debris in the machine regularly.

The above are relatively common failures of cloth inspection machines. Operators should be proficient in handling equipment failures in their daily work. If they encounter serious failures, they should report to the superior department in time, and do not operate under unfamiliar circumstances.

Related news

Routine maintenance and repair of cloth rolling machine

Daily maintenance and repair of the cloth winder keep the machine tidy and clean, and clean the cloth dust regularly. The equipment checks the bearing top wire and the fixing screws of the transmission parts once every six months, and finds that the loosening and locking can effectively extend the mechanical life. Replace the worn-out parts in time. The recommended replacement time for hydraulic oil is 2-3 years. Doing a good job in basic inspection and maintenance can effectively extend the service life of the equipment, reduce the failure rate and save costs.
2021-11-05

Application of cloth winding mechanism on air-jet loom

According to the transmission properties, it can be divided into two categories: mechanical and electronic.
2021-08-30

General knowledge about power usage of cloth inspecting machine

Do not move the electrical equipment in factories and workshops casually. If the electrical parts of the equipment and tools used by yourself are broken down, they shall not be repaired privately, and shall not be operated with faults, and shall be inspected and repaired by an electrician immediately.
2021-08-30

The work requirements of the weaving factory for the cloth inspection machine

Each weaving factory has different requirements for fabric inspection, and the inspection is carried out in accordance with the customer's acceptance standard, while also taking into account the needs of quality management.
2021-07-22
Previous page
1
2
6

Copyright © 2021 Nantong Tongzhou Zhongyi Textile Machinery Co., Ltd.   苏ICP备11035441号 | Powered by www.300.cn