To maintain the cloth inspection machine, first of all, all the driving gears and sprockets in the transmission part of the equipment need to be regularly inspected and refueled in time to ensure that the transmission parts of the cloth inspection machine can maintain good lubrication. In addition, during regular inspections, if parts are found to be severely worn, they must be replaced in time.

Secondly, we need to clean up the dust and cloth debris in the motor and transmission part of the cloth inspection machine in time. Finally, in the process of daily use, we must often remove dust and cloth debris from the fluorescent tubes of the cloth inspection machine and the light-emitting cloth inspection glass plate, so as to effectively ensure the standard lighting of the cloth inspection machine.

1. This series of fabric inspection machines are suitable for inspection of finished fabrics in garment factories, knitting factories, silk weaving factories, terry cloth, cotton cloth, etc.

2. Check an attached fabric roller to avoid fabric edge curling and creases.

3. The inspection board is large, and the milky white hard acrylic board is used, and the light is even.

4. There is an electronic display of the code number to indicate that the length can be measured correctly, with an accuracy of 0.1 yards.

5. Stable start, forward and reverse rotation and stepless speed change.

6. With moving wheels, easy to move.

In addition, the cloth inspecting machine is equipped with an edge-aligning device, and the edges of the cloth are neat and consistent after being rounded.

Moreover, there are spreaders, cloth feeding devices, and quantitative cloth storage devices for the cloth in the back section to eliminate the tension of the cloth.

The cloth inspecting machine can be integrated into three parts, which is easy to disassemble and carry; two sets of opposite side electric eyes are installed-suitable for light transmission cloth, mesh cloth and opaque cloth; and it has support to support, support to match, and match. Support three inspection methods.

The cloth machine can be integrated into three parts, easy to disassemble and carry; two sets of opposite side electric eyes are installed-suitable for light-transmitting cloth, mesh cloth and opaque cloth; and it has support-to-support, support-to-match, and match-to-support Three inspection methods.